EasyManua.ls Logo

3M DBI SALA 5908549 - Maintenance, Servicing, and Storage; Cleaning and Maintenance Procedures; Storage Guidelines; Specifications

3M DBI SALA 5908549
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
6.0 MAINTENANCE, SERVICING, STORAGE
6.1 CLEANING AND MAINTENANCE: Clean the horizontal lifeline
system with water and a mild detergent. Wipe dry with a clean,
dry cloth and hang to air dry. Do not force dry with heat. An
excessive build-up of dirt, paint, etc. may prevent the system
from working properly, and in severe cases, weaken the rope. A
lubricant may be applied to the moving parts of the rope tensioner.
Do not allow lubricant to contact the rope tensioner teeth.
6.2 STORAGE: Store this horizontal lifeline system in a clean, dry
environment, out of direct sunlight. Avoid areas where chemical
vapors are present. Thoroughly inspect the system after extended
storage.
6.3 USER EQUIPMENT: Maintain, service, and store user equipment
according to manufacturer’s instructions.
7.0 SPECIFICATIONS
7.1 MATERIALS:
Rope Tensioner: Steel, plated
O-rings: Alloy steel, plated
Lifeline Rope: 11/16 in. nylon, static kernmantle, breaking
strength: 12,000 lb.
Rope Tensioner Strap: Polyester/Nylon
Snap Hooks: Alloy steel, plated
Carabiners: High tensile alloy steel, plated
Tie-off Adaptor: Polyester web, plated alloy steel hardware

Related product manuals