3M DX70i - Control Panel and Remote Control; Using the Control Panel

16 © 3M 2008. All Rights Reserved.
User Controls 3M™ Digital Projector
Control Panel & Remote Control
There are two ways for you to control the functions:
Remote Control and Control Panel.
Using the Control Panel
Power/
Standby
Refer to the “Power On/Off the Projector” section
on pages 12-13.
Source
Press “Source” to select an input signal.
Menu
Turns the menu On or Off.
Four
Directional
Select Keys
Use to navigate through the menus.
Enter
&RQ¿UP\RXULWHPVHOHFWLRQ
/
Keystone
Adjusts image distortion caused by tilting the
projector (±16 degrees).
Re-Sync
Automatically synchronizes the projector to the
input source.
MENU
SOURCE RE-SYNC
POWER/
STANDBY
TEMP
POWER
LAMP