3M Touch Systems Proprietary Information
45
Configuring
If the test is activated, it can be exited by touching the Setup switch on the touch
screen or by pressing the Setup key on the keyboard.
Stored Screens Test
You can display all the screens currently stored in Expansion Memory with the
Stored Screens Test. To begin the test, touch the STORED SCREENS TEST
touch key or press Shift/9 on the optional keyboard. The Stored Screens
Directory is displayed. (Figure 22)
Figure 21: Stored Screens Test screen
If the terminal has no stored screens, the directory is displayed with an EXIT touch
key and the following message:
NO STORED SCREENS CREATED
The upper right portion of the Stored Screens Directory contains the following
information:
! Used: This indicates the number of screens currently stored in Expansion
Memory. If no stored screens have been created, 0 (zero) is displayed here.
! Remaining: This indicates the number of additional screens that can be
stored, based on the average size of the screens currently stored. If the
terminal has no stored screens, 256 is displayed here. As screens are stored,
this number decreases.
! % Full: This indicates the percentage of total user-accessible memory
occupied by the screens currently stored. If the terminal contains no stored
screens, 0 (zero) is displayed here.
To Next Page
Loading...