3M Touch Systems Proprietary Information
48
3M Dynapro ET 3170 Terminal User’s Installation Guide
Figure 23: Static Special Character Font Test screen
The test remains active until you press the keyboard Setup key or touch the Setup
switch. This returns the terminal to the Test screen.
Dynamic Character Font 1 Test
The Dynamic Character Font 1 Test provides programmers with a detailed view
of the Dynamic Character Font 1 contents. To begin the test, touch the DYNAMIC
FONT l touch key on the second page of the Test screen, or type Shift/3 on the
optional keyboard. Each character in the Dynamic Character Font 1 is displayed
in double size, including characters that underlie control codes. The characters on
the screen are arranged in a checkerboard pattern for easy recognition.
The test remains active until you press the keyboard Setup key or touch the Setup
switch. This returns the terminal to the Test screen.
Dynamic Character Font 2 Test
The Dynamic Character Font 2 Test provides a detailed view of the Dynamic
Character Font 2 contents. To begin the test, press the DYNAMIC FONT 2 touch
key on the second page of the Test screen, or type Shift/2 on the optional
keyboard. Each character in the Dynamic Character Font 2 is displayed in double
size, including characters that underlie control codes. The characters on the screen
are arranged in a checkerboard pattern for easy recognition.
The test remains active until you press the keyboard Setup key or the Setup switch.
This returns the terminal to the Test screen.
To Next Page
Loading...