12
A User Defined Frequency must be between 50 Hz and 999 Hz.
Press the left/right arrows [SK] to move the square cursor to a digit.
Press Select [SK] to enter the number in the frequency field.
Press OK [5] to save the programmed frequency, or Press Exit [SK] to cancel.
The frequency will appear in the Locate Frequency screen as U ###.
Note: To redefine a previously programmed user frequency, select the
back arrow with the cursor and delete the previous entry.
Menu + More>> + Filter [SK Toggle]
In order to filter out unwanted power influences while locating with user-
defined frequencies, verify the correct frequency is selected for your
location (default 60 Hz).
To Next Page
Loading...
Need help?
General
