38
Editing Templates
The operator can select an existing template and make changes to it in the
same manner describe in Creating Templates. The following save screen
will appear.
Over Write: Saves all modifications that have been made to the original
template.
Rename: Overwrites the old template with the new name and all
modifications. Screen will return to the template name field. Modify the
name of the template and press OK [5] to save.
Save New: Creates a new template containing all information. Original
template remains unchanged. Screen will return to the template name field.
Modify the name of the template and press OK [5] to save.
Cancel: Clears all modifications made to any unsaved template.
Note: User templates can also be created on a PC using 3M
™
Dynatel
™
PC
Tool Kit software and then downloaded to the receiver via the RS232 port
[14] on the unit.
Writing iD Markers
The write mode enables the user to write or program information into 3M
™
EMS iD Markers 1400 Series. It is also possible to edit the information to
be programmed.
To Next Page
Loading...
Need help?
General
