34
Save [SK] will place each entry in sequential order in memory (M1 - M5)
until five readings have been stored. The unit will overwrite saved entries
in excess of five, beginning with M1.
Press Clear All [SK] to delete all stored depth information.
The operator may select the memory location to store the depth readings by
pressing Mem Select [SK Toggle]. When the preferred location appears on
the screen, press Save [SK]. The screen and memory location will populate
with the current information.
Each memory location can be reviewed by pressing Mem Select [SK Toggle]
Press Locate [5] to return to Marker Locate Mode.
To Next Page
Loading...
