3M FREEDOM 5000 - Additional Spare Parts; Electronic Boards; Housing & Hardware Parts

53
087-0020 REV E
Spare Parts - continued
Part
Description No.
Electronic Boards
I/O and Power Supply Board 096-2499
CPU Board 096-2498-1
CPU Board with SST 096-2498
Display Board 096-2497
PCB Cable Assembly 096-2613 (Connects Display Board to Power Supply Board)
Housing & Hardware
“L” type mounting bracket 096-2666
Wall/Surface Mounting Plate 096-2618
Enclosure with sensor housing 096-2670 (Supplied without P.C.B.A.’s)
Enclosure with remote sensor
fitting – does not include
cable assembly 096-2671 (Supplied without P.C.B.A.’s)
Rem. Sensor cable assy w/cord grip 096-2619
Remote Sensor cable assy without
cord grip (used when cable is
installed into conduit) 096-2706
ORDERING NOTES-
1. NOT to be used
with ROCK SOLID sensors.
2. The condensing humidity end cap has only been tested for H
2
S.
3. Not available with SST.
4. Type A is used with the following transmitters: Rock Solid Cl2, ClO2, HBr, HCl, HF, SO2, O3. Also standard Cl2 sensor.
5. Type B is used with the H2S transmitter
6. This endcap, less humishield, is also used with Model 50 Phosgene sensor.
7. Fits Series 5000 transmitters only.
8. Duct adaptors can be used with both remote and integral sensor configurations.
Freedom 5000 Universal Analog Toxic Gas Detector
Instruction Manual