3M G5 - Page 46

Configuration
March 2014 – Revision 2.0
Page 46 of 74
3M™ Drive-Thru Systems Model G5 and Model XT-1
Installation Manual
Store is Now Closed Prompt
Perform the following procedure to enable or disable the automatic store closed
prompt to let customers know in your absence that the store is closed:
Note:
Make sure that you disable the automatic store closed prompt in stores that are
open 24 hours.
I. Enter the base station configuration mode, see page 35.
• Change the value for 07 Global Settings > ”Store is Now
Closed” Prompt? to Yes or No.
Pull Ahead Prompt
You can let customers know to pull ahead when they are at order point #2 in a
tandem drive thru when it is out-of-service.
Figure 18
Perform the following procedure on Base #2 to enable or disable the automatic
pull ahead for Order Point #2:
• Enter the base station user service mode, see page 35.
• Change the value for 07 Global Settings > ”Pull Ahead”
Prompt (Tandem Only)? to Yes or No.
Customer Order Point Prompt Language
Perform the following procedure to select the language(s) of the store closed and
pull ahead prompts. The prompts can be spoken in English, Spanish, French,
German, or repeated in multiple languages:
• Enter the base station configuration mode, see page 35.
• Change the value for 07 Global Settings > Order Point
Prompts in English? to Yes or No.
• Press Enter to implement the change or press Mode to abandon the
change and leave the option at its previous setting.
• Change the value for 07 Global Settings > Order Point
Prompts in Spanish? to Yes or No.
• Press Enter to implement the change or press Mode to abandon the
change and leave the option at its previous setting.
• Change the value for 07 Global Settings > Order Point
Prompts in French? to Yes or No.
Pick Up
Cash
Order
Point #2
Order
Point #1