3M SE-402 - Opening the Setup Screen for Instrument Configuration; Start Screen;Measurement Screen; Figure 3-2: Opening the Setup Screen

Setup/instrument configuration
Opening the setup screen for instrument configuration
Sound Examiner SE-400 Series
9
Opening the setup screen for instrument configuration
The settings can be accessed or changed when in stop mode by selecting the icon via the
corresponding softkey (see A below). The Setup screen appears. (See “B” below).
Figure 3-2: Opening the Setup screen
Softkey:
Press to select the corresponding
setup menu.
Setup icon:
Press the softkey to
open the menu.
B-1: Setup screen (non –IS models)
A. Start screen /Measurement screen
B-2: Setup screen (IS models)