3M SE-402 - Sound Examiner (Non-IS Models) and Logging Rates

Sound Examiner (non-IS models) and logging rates
Connecting an extension cable
Sound Examiner SE-400 Series
29
Sound Examiner (non-IS models) and logging rates
When logging is enabled, the following parameters are logged: L
MAX
, L
MIN,
L
Peak,
and L
EQ
at a specific logged
interval. The SE-400 non-IS models will log approximately 57,600 records per parameter in 60 seconds at 40
days with a 2MB card.
Below is a table outlining different logged intervals with the number of days it will log.
Logging Rates (seconds or minutes)
Days
Logged Records
5 sec.
3
57,600
15 sec.
10
57,600
30 sec.
20
57,600
60 sec.
40
57,600
5 min.
200
57,600
15 min.
599
57,600
30 min.
2,070
57,600
60 min.
4,140
57,600