4
WARNING
To reduce the risks associated with fire and explosion:
• Do not use in an explosive environment - monitor is not designed to be intrinsically safe.
To reduce the risks associated with medical device malfunction:
• Persons with heart pacemaker devices should never use this monitor.
To reduce the risks associated with hazardous voltage and fire:
• Use only the power supply provided by 3M and specified for the country of use.
• Do not position the monitor accessories or other equipment where unplugging the power supply is difficult.
• Always locate the power source (socket or outlet) near the equipment. The power supply plug serves as
the disconnect device.
• Do not modify or attempt to service the power supply or monitor; there are no user serviceable parts.
• Do not use the power supply if damaged;
• Replace power supply if damaged using only 3M supplied parts.
• Do not use the 3M
™
Workstation Monitor 724 or its power supply outdoors in wet/humid
environments.
• Do not use the Workstation Monitor 724 or its power supply outside of the operating conditions listed in
this user guide.
• Always follow instructions for installation as stated in these user instructions.
CAUTION
To reduce the risks associated with environmental contamination:
• Dispose of this monitor in accordance with all applicable local and government regulations.
NOTICE
To reduce the risk of ESD damage to components or assemblies being handled:
• Monitor must be checked periodically to verify each test mode is functioning correctly.
• Ensure proper operation of monitor by performing operational verification test as required.
• Ensure tester is properly grounded.
To Next Page
Loading...
Need help?
General
