3MillID S-Gang Keypad Reader

To Next Page

3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129

+1 303 475 4972

sales@3millid.com

100-02640-A

www.3millid.com

Images shown in this document are for illustrative purposes only. The features, colours, style and appearance may change without notice.

Product Features

Designed to embrace cutting-edge RFID

technologies in a stylish and innovative

package, this advanced access control reader

offers a refreshing breakthrough in the access

security marketplace. Shaped in a sleek single-

gang style design, with an RGB LED illuminated

keypad, offering ‘prox-and-pin’ security, the reader

may be fixed directly onto a US electrical backbox.

This powerfully secure and innovative reader has a beautifully

clean aesthetic, and a bright RGB LED that can be applied to many

applications such as colour coded access levels, migration status or mood lighting.

The reader housing is moulded using tough polycarbonate plastic, and includes a shadow-line

backplate, a subtle and simple mechanical design feature that makes the reader, when fixed,

appear to float against the wall.

•125KHzProximity

•13.56MHzSmart Contactless

•Bluetooth LE

•Black textured moulding

•Slim profile

•RGB LED

•Fully encapsulated electronics

•RGB illuminated keypad

•Wide range of output formats

•5 year limited warranty

•Read range up to 10cm (4 inches)

MANUAL

S-Gang

Keypad

style or technology - now you can have both

Main Page

Need help?

Do you have a question about the 3MillID S-Gang Keypad Reader and is the answer not in the manual?

Summary

Specification

Performance Levels

Details UL294 Access Control Performance Levels for the product.

Environmental Conditions

Specifies operating temperature, humidity, and ingress protection.

Electrical Requirements

Covers power supply, voltage, current, and data output types.

Physical Dimensions

Provides the physical size of the reader module.

Material Composition

Identifies the potting compound and moulding materials.

Wiring and Connections

Details recommended cable types, lengths, and terminal functions.

Keypad Programming

Log On and PIN Mode

Instructions for entering programming mode and setting the PIN mode.

Key Tone and Card Tone Configuration

Settings for audible feedback on key presses and card presentations.

Proximity Reading and Data Transmission

Configures proximity reading and card data transmission.

LED Configuration and Site Code

Settings for LED color, site code embedding, and quiescent LED color.

HID, EM, and CASI Card Reader Configuration

Configures reader compatibility for HID, EM, and CASI card technologies.

AWID, KANTECH, and FARPOINTE Configuration

Reader settings for AWID, KANTECH, and FARPOINTE card types.

MIFARE, ENDIAN, and DESFire Configuration

Reader settings for MIFARE, ENDIAN, and DESFire card technologies.

Engineer PIN Management and Exit

Procedure to set the engineer's PIN and safely exit programming mode.

The 3millID S-Gang Keypad is an advanced access control reader designed to integrate cutting-edge RFID technologies within a stylish and innovative package. This device offers a refreshing breakthrough in the access security marketplace, combining aesthetic appeal with robust functionality.

Function Description:

The primary function of the 3millID S-Gang Keypad is to provide secure access control through various identification methods, including proximity cards (RFID) and PIN codes. It is designed for both indoor and outdoor use, offering versatility in installation. The reader features an RGB LED-illuminated keypad, enabling "prox-and-pin" security, which means users can gain access by presenting a proximity card and/or entering a PIN. The RGB LED also serves multiple purposes beyond simple indication, such as color-coding access levels, displaying migration status, or providing mood lighting, enhancing its utility and user experience.

The device is capable of reading various RFID card technologies, including 125KHz Proximity, 13.56MHz Smart Contactless, and supports Bluetooth LE for modern connectivity options. It processes keypad data in several industry-standard formats, including Wiegand, Clock & Data, and custom outputs, ensuring compatibility with a wide range of access control systems.

Important Technical Specifications:

Dimensions: 120mm x 76mm x 21mm (4.7 x 3.0 x 0.8 inches).
Operating Temperature: -35°C to +66°C (-31°F to +151°F).
Humidity: 85 ±5% at 30 ±2°C (86 ±3°F).
Ingress Protection (IP) Rating: IP65, indicating high resistance to dust and water ingress, making it suitable for outdoor environments.
Power Supply: Requires a UL294 Listed, low-voltage Class 2 power-limited supply or control panel, capable of 4 hours standby.
Voltage: +10Vdc to +16Vdc.
Current: 135mA typical.
Data Voltage: Rest >4Vdc / Active <1Vdc.
Data Output: Wiegand, Clock & Data, Custom Outputs.
Indication: 1 RGB LED + RGB illuminated keypad.
Sounder: Integral speaker.
Read Range: Up to 10cm (4 inches).
Polymeric Materials: Potting compound is UL R/C (QMFZ2), and mouldings are UL746C.
Recommended Cable: BELDEN 953x (for Wiegand) or BELDEN 9502 (for RS485). All cable and wiring must be Listed and suitable for use.
Maximum Cable Length: 30 metres (98.5 feet) for UL.
Minimum Permissible Wire Size: Not less than 26 AWG (0.24mm²).
Performance Levels (UL294 Access Control):
- Destructive Attack: Level I
- Line Security: Level I
- Endurance: Level IV
- Standby Power: Level I
Certifications: FCC Part 15, UL Listed, CE (EU Directive 2014/53/EC), RoHS (EU Directive 2011/65/EC).
Warranty: 5-year limited warranty.

Usage Features:

The 3millID S-Gang Keypad is designed for ease of installation and configuration. It can be fixed directly onto a US electrical backbox, and its sleek single-gang style design ensures a clean, simple aesthetic. The reader housing is molded from tough polycarbonate plastic, and a shadow-line backplate makes the device appear to float against the wall when installed.

Keypad programming is facilitated through a step-by-step procedure, allowing users to configure various settings:

*PIN Mode (01): Configures how the reader handles keypad data output, supporting formats like HID 4-bit Wiegand, Dorado 8-bit Wiegand, Mercury 8-bit Wiegand burst, Clock and Data (1-digit and 8-digit buffered), and various Wiegand formats (26-bit, 32-bit, 34-bit buffered).
*Key Tone (02): Enables or disables an audible tone on key presses, providing confirmation or error feedback.
*Card Tone (03): Enables or disables an audible tone when a card is presented, indicating successful reading or an error.
*Prox Read (04): Allows disabling the transmission of proximity card data, while still indicating a card read with a beep.
*RX00 LED Colour Configuration (05): Configures the RGB LED to various modes, including standard RX LED configuration, RX Demo, RX buzzer, and others.
*Site Code Embedding (06): Allows combining a site code number (0 to 65535) with the card number for a complete card information message.
*RX00 LED Quiescent Colour (07): Sets the idle color of the RGB LED to options like Blue, Magenta, Yellow, Orange, Red, White, Turquoise, or OFF.
RFID Card Reading Configuration:
- *RX00 HID (10): Configures the reader to read HID® proximity cards, supporting Wiegand Pass Through and Clock and Data.
- *RX00 EM (11): Configures the reader to read EM proximity cards, supporting 26-bit, 34-bit, 42-bit Wiegand, and Clock and Data.
- *RX00 CASI (12): Configures the reader to read CASI proximity cards, supporting various 40-bit Wiegand formats (4001, 4002, Extended 4001, Extended 4002).
- *RX00 AWID (13): Configures the reader to read AWID proximity cards.
- *RX00 KANTECH (14): Configures the reader to read KANTECH® proximity cards, supporting 26-bit and 39-bit XSF Wiegand.
- *RX00 FARPOINTE (15): Configures the reader to read FARPOINTE® proximity cards.
- *RX80 MIFARE (20): Configures the reader to read MIFARE® proximity cards, supporting 26-bit, 32-bit, 34-bit Wiegand, Clock and Data, and MIFARE® SE.
- *RX80 ENDIAN (21): Configures the reader to read ENDIAN proximity cards, supporting Big ENDIAN and Little ENDIAN.
- *RX90 DESFire (30): Configures the reader to read DESFire® proximity cards.
*Set Engineer's PIN Code (98): Allows changing the default 4-digit engineer's PIN.
*Log Off (99): Exits the configuration mode and saves any changes.

Maintenance Features:

The device is designed for durability with its tough polycarbonate housing and fully encapsulated electronics. Following installation, it is recommended to subject the access control system and control units to a maintenance and operational test procedure at least once a year. The programming mode includes a timeout feature (approximately 30 seconds of inactivity) to prevent unintended changes, ensuring that settings are saved only when explicitly logged off. In case the engineer's PIN is forgotten, a RESET code can be obtained from the installer or supplier. The product's compliance with RoHS directives also indicates its commitment to environmental sustainability, facilitating proper disposal and recycling at the end of its lifecycle.