EasyManua.ls Logo

3MillID S-Gang Keypad Reader - Parts List; Specification; Performance Levels; Environmental Conditions

3MillID S-Gang Keypad Reader
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3millID 9249 S. Broadway Building #200 Suite 826 Highlands Ranch CO 80129
+1 303 475 4972
sales@3millid.com
© 3millID
100-02640-A
www.3millid.com
1 xreader MODULE
1 xreader BACKPLATE
1 x3 x 10mm black cross-head securing screw
10cm
up to
+
-
66
35
C
5yrs
1.parts list
2.specification
performance level for access control
This product complies with the following UL294 Access Control Performance Levels:
Destructive AttackLevel I
Line SecurityLevel I
EnduranceLevel IV
Standby PowerLevel I
See the UL Listed access control unit controller installation instructions for reader
compatibility.
UL Ref. Number??????
environmental
Operating Temperature-35°C to +66°C (-31°F to + 151°F)
Humidity85 ±5% at 30 ±2°C (86 ±3°F)
Ingress ProtectionIP65 (not evaluated by UL)
PositioningSuitable for INDOOR and OUTDOOR use.
electrical
Power supplyPower is to be provided by a UL294 Listed, low-voltage
Class 2 power limited supply or control panel, capable
of 4 hours standby.
Voltage+10Vdc to +16Vdc
Current135mA typical
Data VoltageRest >4Vdc / Active <1Vdc
Data OutputWiegand, Clock & Data, Custom Outputs
Indication1 RGB LED + RGB illuminated keypad
SounderIntegral speaker
dimensions120mm x 76mm x 21mm(4.7 x 3.0 x 0.8 inches)
polymeric materials
Potting compoundUL R/C (QMFZ2)
MouldingsUL746C
wiringWiring methods shall be in accordance with the
National Electrical Code (ANSI/NFPA70), local
codes, and the authorities having jurisdiction.
Recommended cableBELDEN 953x (or equivalent UL listed) - Wiegand
BELDEN 9502 (or equivalent UL listed) - RS485
All cable and wiring must be Listed and suitable for use.
Cable lengthCable length must not exceed 30 metres maximum
(98.5 feet) for UL
Minimum permissible wire sizenot less than 26 AWG (0.24mm²)
connections
Screw terminal(All readers in this series use this terminal connection)
1-0VSupply voltage ground
2-+VdcSupply voltage (+10Vdc to +16Vdc)
3-DATA1/CLKWiegand or Clock/Data output
4-DATA0/DATWiegand or Clock/Data output
5-GREENGreen LED control input
6-REDRed LED control input
7-BuzzerBuzzer control input
8-TMPR/CPTamper or Card Present output
9-RS485-RS485 Bus
10-RS485+RS485 Bus
120mm
4.7 inches
21mm
0.8 inch
76mm
3.0 inches
6
8
0
9
#
4
7
*
5
12
3
MANUAL
3M
S-Gang
Keypad
3