4EVAC Compact 500 - Page 14

Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4EVAC Compact 500 quick guide
DoP OD 16.47
Author:
DD
Design revision:
2.0
Page 14 of 33
6.7.1.1. Single channel
For single channel mode (2x100W), two jumpers on the amplifier unit must be set to the “100V” position
(center position). One jumper per channel.
Jumper setting 100V per channel – amplifier unit
Single channel: line 1, line 2 – loudspeaker line output