4IPNET EAP760 - Configure VAP Profile Settings

Product Handbook
Product HandbookProduct Handbook
Product Handbook
EAP760 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
12
Step 3. Configure VAP (Virtual Access Point) Profile Settings
VAP Configuration Page (VAP-1 shown)
 EAP760 supports up to 16 virtual APs (VAPs) per RF Card.
 Configure VAP profile settings ：
(a) Select the VAP Configuration tab to configure the settings of the desired VAP.
(b) Enable a specific VAP from the drop-down menu of Profile Name and configure related settings
below.
 Check VAP status ：
After finishing VAP configuration, the status of enabled Virtual APs shall be reflected on the VAP
Overview page.