112 PCM-5896 User Manual
Installing PC/104 modules
The PCM-5896's PC/104 connectors give you the flexibility to
attach PC/104 expansion modules. These modules perform the
functions of traditional plug-in expansion cards, but save space
and valuable slots. Modules include:
• PCM-3115B PCMCIA Module (two-slot)
• PCM-3420 PC/104 Fast SCSI Module
• PCM-3600 PC/104 Fax/Modem Module
• PCM-3610 Isolated RS-232 and RS-422/485 Module
• PCM-3660 Ethernet Module
• PCM-3718 30 KHz A/D Module
• PCM-3724 48-channel DIO Module
• PCM-3910 Breadboard Module
• PCM-3810 Solid State Disk Module
Installing these modules on the PCM-5896 is a quick and simple
operation. The following steps show how to mount the PC/104
modules:
Step1 Remove the PCM-5896 from your system, paying
particular attention to the safety instructions already
mentioned above.
Step2 Make any jumper or link changes required to the SBC
now. Once the PC/104 module is mounted, you
may have difficulty in accessing these.
Step3 Mount the PC/104 module onto the SBC. Do this
by pressing the module firmly but carefully onto the
mounting connectors.
Step4 Secure the PC/104 module onto the SBC using
the four mounting spacers and srews.
To Next Page
Loading...
