Need help?Do you have a question about the A&D EW-150i and is the answer not in the manual?
Explains the function of each control key on the balance.
Guides on balance placement, leveling, and initial calibration.
Details using AC adapter or rechargeable battery pack.
Instructions for basic power management and backlight functionality.
How to select and use different weighing units.
Step-by-step guide for standard weighing operations.
Explains automatic, manual, and fixed weighing range settings.
How to use the counting function with sample unit weight.
Guide to displaying values as a percentage of a reference weight.
How to set and use the HI/OK/LO comparison function.
Procedure for calibrating the balance with a calibration weight.
How to adjust for gravity variations without a calibration weight.
Overview of key functions and how to access the setting mode.
Example of configuring auto power-off and ACAI function.
How to select and save commonly used weighing units.
Detailed list of available functions and their parameters.
Details on RS-232C connection, baud rates, and pin configuration.
Explains data structure, headers, units, and output modes (Stream, Key, Auto-print).
How to control the balance via computer commands.
Procedure for assigning an ID number for GLP data.
How to generate GLP reports and calibration test reports.
Details on the comparator output and buzzer option.
Installation and use of the underhook for weighing suspended items.
Information on rechargeable battery and carrying case options.
Instructions for balance care and what not to do.
Explains overload, range, unit/100% weight, and sample quantity errors.
Explains CAL, low battery, AC adapter, stability, and internal errors.
Technical details for the EK-i balance models.
Technical details for the EW-i balance models.
Capacity and display details for various units.
Diagrams and measurements of the balance unit.
To Next Page
General
