Need help?Do you have a question about the A&D EW-1500i and is the answer not in the manual?
Describes the function of ON/OFF, MODE, RE-ZERO, SAMPLE, and PRINT keys.
Explains display symbols (Stability, ACAI) and physical parts like weighing pan and leveling feet.
Instructions for placing the balance, adjusting leveling feet, and selecting an appropriate location.
Details on using the AC adapter and the optional rechargeable battery pack.
Procedure for turning the balance on and off, including auto-power off function.
Explanation of how the LCD backlight operates and how to configure it.
Guide on selecting counting mode, storing sample units, and counting objects.
Instructions for selecting percent mode, setting reference weight, and reading percentages.
Step-by-step guide to select a comparison mode and set parameters.
Procedure for calibrating the balance using a calibration weight.
Method to adjust balance for gravity variations when calibration weight is unavailable.
Explains the general functions of the balance's keys.
Steps to enter the function setting mode to configure various parameters.
Details on transmission system, data format, and pin connections.
Explanation of the data structure, headers, units, and terminator for serial output.
Describes Stream, Key, Auto-print (A/B), and Command modes for data transmission.
Details on controlling the balance via computer commands.
Procedure for assigning an ID to the balance for GLP data.
Instructions for printing calibration and GLP reports.
Details on the OP-04 option for external signaling and buzzer functions.
General recommendations for balance care and service.
List and description of error codes displayed by the balance.
Detailed technical data for the EK-i series balances.
Detailed technical data for the EW-i series balances.
Data tables detailing specifications for various weighing units.
Diagrams and measurements illustrating the physical size of the balances.
To Next Page
General
