Aastra 5370 - Clearing a Key

Personalizing your phone
Aastra 5370/Aastra 5370ip 107
eud-1281/1.3 – R3.0 – 04.2013
Clearing a key
You want to clear the assignment made to a configurable key.
Select the function No function to delete the function key assignment.
Function selection for configurable key
This section contains a list of all the functions you can store under a configurable key
via the menu. Contact your system administrator for more information.
More information on how to store functions under a configurable key using function
commands and function code can be found in chapter "Formulating functions",
page 112.
Answer
Setting the answering mode:
Scroll to Answer and press the Modify Foxkey.
Select the required setting and confirm with the Ok Foxkey.
➔The setting is stored.
Setting possibilities for answering:
Key to answer the call by pressing the Team key, Handset to answer by picking
up the handset, and Hands-free to answer automatically with hands-free.
Notes:
• The Handset and Hands-free settings only work when the ringing signal is
activated.
• If you select answer using Handset or Hands-free, you must also specify the
Priority, with 1 being the highest priority, and 8 the lowest:
<long>
No function
To clear the Foxkey:
Press the Foxkey with a long keystroke.
➔The display shows the key type.
Scroll to No function and confirm with the Ok Foxkey.
➔The key configuration is cleared.
<long>
No function
To clear a configurable key:
Press the configurable key and hold it down for a moment.
➔The display shows the key type.
Scroll to No function and confirm with the Ok Foxkey.
➔The key configuration is cleared.
Function Description
No function Select this function to delete the function key assignment.
Call Forwarding
With this function you forward incoming calls directly to a different destina-
tion. For further information refer to chapter "Forwarding calls (Call forward-
ing)", page 55.