Aastra 5380 - Page 110

Personalizing your phone
110 Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Store a team partner under a key – team key
Together with other members you wish to organise yourself into a team so that on the
one hand you can always be reached as a team and, on the other, to ensure mutual
substitution. You can configure a configurable key as a Team key and then assign it to
a team partner. One team key is configured for each team member, allowing you:
• to call one another with a single keystroke;
• to answer an incoming call for another team member with a single keystroke;
• and to select whether the flashing team key should be complemented by a ringing
tone whenever a team partner is called. You can configure a ringing delay for the
ringing tone;
• to choose between answering directly using automatic hands-free operation, pick-
ing up the handset, and pressing the Team key.
The following audio settings are possible: Ring, Melody, Speed, Answer.
Notes:
• The selection of functions can be found in the chapter "Function selection for
configurable key", page 112.
• In addition to the large number of predefined functions you can also write your
own function. For more information please refer to the chapter "Function com-
mands, function codes", page 117.
Notes:
• A Team key can only be allocated to a configurable key.
• To find out how to use a Team key, refer to the Chapter "Using the Team key",
page 81.
<long>
Press the configurable key and hold it down for a moment.
➔Display shows choice of key types.
Team key
Scroll to Team key and press the Select Foxkey.
<Call number, name>
Entering or editing phone number. If the user is stored in the system, the name
is automatically entered. Confirm with the Ok Foxkey.
➔The display shows the properties with which you can configure the team
key.
☛