Aastra 5380 - Page 109

Personalizing your phone
Aastra 5380/Aastra 5380ip 109
eud-1282/1.3 – R3.0 – 04.2013
Store a function under a key – function key
You want to retrieve a frequently used function - for example "call forwarding on no
reply" - using a single keystroke rather than having to enter it by hand. Usually the
function is assigned so that you:
• activate the function with the first keystroke – key-LED lit,
• and deactivate the command again with a second keystroke - key-LED off.
If you have connected an Aastra M530 or Aastra M535 expansion key module, the
LED indicates the key status:
• Red: Function is activated.
• Green: Function is deactivated.
Storing a function under a key (from a predefined selection of functions):
Menu
Storing a function under the Foxkey:
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
Keys > Foxkey
Scroll to Keys > Foxkey > Select and press the Foxkey you want.
➔Display shows choice of key types.
Function key
Scroll to Function key and press the Select Foxkey.
➔The currently set function is displayed with .
<Function>
Select the function you want and press the Select Foxkey.
➔The further prompting depends on the function (see Chapter "Supplemen-
tary features", page 35). Once you have made all the settings, the function is
stored under the key.
Storing a function under a key (from a predefined selection of functions):
<long>
Storing a function under a configurable key/presence key:
Press the key and hold it down for a moment.
➔Display shows choice of key types.
Function key
Scroll to Function key and press the Select Foxkey.
➔The currently set function is displayed with .
<Function>
Select the function you want and press the Select Foxkey.
➔The further prompting depends on the function (see Chapter "Supplemen-
tary features", page 35). Once you have made all the settings, the function is
stored under the key.