Aastra 5380 - Page 127

Operator phone
Aastra 5380/Aastra 5380ip 127
eud-1282/1.3 – R3.0 – 04.2013
Park call on Line key
You are connected with your call partner via a Line key and decide to park the call.
You can park the call on the current Line key.
Switching active lines
You are in a call and want to answer a call on another Line key or make a call.
You can switch lines by pressing a key. The active call is automatically parked locally.
Park
Park call:
Press the Park Foxkey.
➔Line key flashes slowly, is displayed.
To retrieve a parked call:
Press the relevant Line key.
➔You are now back through to the parked call partner, is displayed.
Note:
If you have several calls in parallel and you press another line key, the other call
is automatically parked.
Parking the call and switching lines:
Press the new line key you want.
➔The active call is parked. The call on the selected line is activated.
To retrieve a parked call:
Press the relevant Line key.
➔You are now back through to the parked call partner.
Note:
You cannot take a call on a line between two other call parties by pressing the
corresponding Line key.