Aastra 5380 - Page 144

Reception telephone
144 Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Enhanced settings
You wish to perform further settings for your rooms.
You can perform the following settings. These settings apply to all rooms.
• Room-to-room permission: Your hospitality manager defines the standard permis-
sion in the communication system. You can manually modify this setting at any
time during check-in or during a guest's stay.
– Allowed: set the setting to Allowed when a guest is checking in, so a guest can
call a room from another room.
– Not permitted
– Keep settings as is: To apply the existing forwarding, select Keep settings as is.
• Default actions at check-out:
– Delete guest data: this is where you specify whether the data input about a
departing guest is deleted when the guest is leaving or only when the next
guest is checked in.
– Print bill: the list of all phone calls, including call charges, is printed out.
Menu
Press the Menu Foxkey.
Reception
Scroll to Reception and press the Select Foxkey.
Enhanced settings
Scroll to Enhanced settings and press the Select Foxkey.
Room permission
Activating room permission:
Scroll to Room to room permission and press the Select Foxkey.
<Room setting>
Select the required setting and confirm with the Ok Foxkey.
➔The setting is stored.
Default actions at
check-out
Activating the default actions at check-out:
Scroll to Default actions at check-out and press the Select Foxkey.
<Room setting>
Select the required setting and confirm with the Ok Foxkey.
➔The setting is stored.