Aastra 5380 - Page 69

Supplementary features
Aastra 5380/Aastra 5380ip 69
eud-1282/1.3 – R3.0 – 04.2013
Paging an internal user using the general bell
You are unable to reach an internal user and thus want to page them.
When general bell is configured in the system, you can search for an internal user
using the general bell. The paged person can answer from any phone.
<Function code>
1. Enter function code #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access digit.
Pick up the handset.
➔The phone number displayed is dialled.
Note:
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
<Function code>
Or:
1. Enter function code #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Pick up the handset.
➔The phone is now enabled; the external user is called.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the PIN", page 98 or use the function code *47
(see "User’s Guide Function Codes" on the Aastra DocFinder). If you have forgot-
ten your PIN, your system administrator can reset it to the default setting.
Menu
Press the Menu Foxkey.
Call features
Scroll to Call features and press the Select Foxkey.
Page
Scroll to Page and confirm with the Ok Foxkey.
<Phone number>
Enter the phone number f the person to be paged and confirm with the Ok
Foxkey.
➔User is called and receives your phone number.
☛
☛
☛