44
Telephoning
If call waiting is activated, you will hear the ringing tone and see the call in the display. You can ans-
wer the waiting subscriber as follows:
Press the R softkey.
or …
Press the Call key.
or …
Press ❯❯❯
and select Receive.
In the case of a second connection, the following options are available to you:
Close current connection
Press ❯❯❯
and select Release call.
Press ❯❯❯
again and select Retrieve.
or …
Press the R softkey or the call key .
Change between the connections: Brokering
Press ❯❯❯
again and select Brokering.
or …
Press the R softkey or the call key .
Forwarding a connection with notification
Press ❯❯❯
again and select Transfer.
or …
Press the End key.
To Next Page
Loading...
