46
Close current connection
Press ❯❯❯
and select Release call.
Press ❯❯❯
again and select Retrieve.
or …
Press the R softkey or the green Call key .
Change between the connections: Brokering
Press ❯❯❯
and select Brokering.
or …
Press the R softkey or the green Call key.
On Aastra 622d, 632d, 650c with icon menu setting (if the R softkey is not offered):
Press the green Call key or the Hold softkey, followed by Brok. (Brokering).
Forwarding a connection with notification
Press ❯❯❯
again and select Transfer.
or …
Press the red End key.
Initiate a Conference Call
During an enquiry call:
Press ❯❯❯
again and select 3 party.
Note
You can invite additional subscribers into an active conference call: Press R and call ano -
ther subscriber. When the call is answered, press
❯❯❯
and select 3 party.
Conference calls are only possible, when enabled by your system.
Forwarding calls without notification
You are in the middle of a phone call and want to forward it to another subscriber without advance
notification:
Press ❯❯❯
and select Transfer.
Telephoning
To Next Page
Loading...
