Telephoning
77
Rejecting an Announcement
Answering a Call-back
A call-back request is carried out when the other subscriber is free again.
P In the MenuCard
Announcement
, select
Reject
if you want to
reject the announcement call. The subscriber making the
announcement then hears the busy tone.
or:
T/ g You can also reject the announcement by pressing the dis-
connect key or a feature key on which you have programmed
the
Reject
function.
or:
L/ K You can also reject an announcement call with Announcement
with intercom by pressing the hands-free/open-listening key or
– if you are using a headset – press the headset key (requirement
for headset operation: headset must be activated, see page 114).
H When you hear the signal on your telephone, lift the handset.
The other subscriber will be called.