49Dialog 4224 Operator
Service Features
Announcing
When you receive a call for an extension that needs to be
announced before extending follow these procedures (the terminal
must be in manual extending mode).
The extension is free
z Dial the extension number.
The right side of the display shows
EXTENSION and the called
extension’s number and name.
Speech >
Ò Press.
When the called party answers,
ANSWER is shown.
Note: If the extension called is in your own private network
there is no need to press the Speech > key to call as it is
done automatically.
Announce the call.
Note: If you want to speak to both parties simultanoeusly,
press the < Speech > key before extending.
ê
Press to extend the call.
The call is extended and the terminal is cleared.
The extension is busy
If you are announcing a call to a busy extension and Call Waiting is
permitted.
The display shows
BUSY and C.WAIT PERMIT
If the caller wishes to wait:
Á Press to activate call announcing.
ê
Press to Camp On the call.
The call is camped on to the extension with announcing, the
terminal is cleared. When the extension becomes free you will be
recalled.
To Next Page
Loading...
Need help?
General