English
Important!
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care
should be taken when placing the handset near these items.
Connection
1. Connectthecurlycordtothehandsetandtothesocketmarked
q
onthe
undersideofthetelephone.Placethehandsetontothecradle.
2. Connectthetelephonelinecordtothesocketmarked
T
onthetelephone,andto
atelephonenetworkwallsocket.
3. Liftthehandsetandlistenforthedialtone.Yourtelephoneisnowoperational.
4. EnsurethecorrectRecalltimehasbeensetforyoursystem/network(ie:normally
100msfortheUK/AUS,but600msforNZ).Forfurtherinformationpleaserefer
to page 4: Technical Information.
Making a call
Dialling
1. Liftthehandsetorpress ,dialtonewillbeheard.
2. Dialtherequiredtelephonenumber.Oncethecallisansweredthehandsetmust
beliftedtocontinueyourconversation.
Redial
1. Liftthehandsetorpress .
2. Press
r
toredialthelastnumberdialled.Oncethecallisansweredthehandset
mustbeliftedtocontinueyourconversation.
Volume control
TheHandsetearpiecevolumemaybeincreasedordecreasedduringacall.Press
$
to
increase,or
£
todecreasethevolume.
Toadjustthespeakervolume(handsfreedialling/grouplistening)use3 on
theundersideofthephone.
Group listening
Grouplisteningallowsanyoneinthesameroomasthebaseunittohearbothparties
andfollowtheconversationthroughthebaseunitsspeaker.
Theongoingcallisnotaffectedandcancontinueviathehandset.
TheloudspeakeristurnedOn/Offusing
.
The loudspeaker can also be used when dialling. Press , then dial the number and pick up the
handset once the call is answered. Remember that there is a microphone in the handset only.