Aastra M325 - Call Management and Features; On Hold and Recall; Ringer Settings; One-Touch Memory Functions

English
On Hold
Press
h
toplaceacallonhold.Thecallcanberesumedbyliftingthehandseton
anyparallelconnectedtelephoneonthesameline.
Recall
PresstherecallbuttonRfollowedbytheextensionnumbertotransfercallswhen
connectedtoaPBX(TBRonly).
AccesstoadditionalnetworkservicescanbegainedbyusingtherecallbuttonR,*
and #keys.Contactyournetworkoperatorformoreinformation.
Ringer
Theringervolume,melodyandtonecanbeselectedusingtheswitcheslocatedonthe
undersideofthetelephone(unscrewthecover):
e Ring volume
n Ringmelody
Ringer tone
Memory
Thistelephonehas10One-Touchmemories.
Storing One-Touch Memories
1. Ensurethe
P/N
/PROG. switchlocatedontheundersideofthetelephoneis
set to
P
.
2. Liftthehandsetor press ,dialtonewillbeheard(ignoreanytone).Press
P
.
3. Enterthetelephonenumbertobestored(upto32digits).Press
P
.
4. Selectamemorypositionbypressingthecorrespondingmemorybutton.
5. Replacethehandset.
If you need to insert a pause in the telephone number press
r
.
If you need to change a number, store the new number in the same location as the old one.
Dialling using One-Touch Memories
1. Liftthehandsetor press ,dialtonewillbeheard.
2. PresstherequiredOne-Touchmemorybutton.
Connection of additional equipment
Onthesideofthetelephonethereisasocketmarked8,thiswillallowadditional
telephoneequipmenti.e.cordless,modems,etctobeconnectedallowingaccesstothe
telephoneline.
You can recongure the phone ports using the switch (1:2) on the underside of the telephone (behind the
attached cover), so that the telephone port (1) and the outer port (2) are connected in parallel.