EasyManua.ls Logo

Aastra M325 - Technical Details and Configuration; Labels and Protective Cover; Hearing Aid Compatibility; Technical Information and Switches

Aastra M325
36 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
Labels/protective cover
Thebackcoverisfastenedwith2piecesofplasticandsecuredbytwoscrews,thesehave
toberemovedrst.
Informationsuchasacompanylogocanbeplacedunderthebackcover.Thisisespecially
usefulwherethebackofthetelephoneisfacingthecustomer/visitoronareceptiondesk.
Thememoryindexcovercanalsoberemovedbycarefullyprisingtherighthandsideof
thecoverusingasmallatbladescrewdriver.
Hearing aid compatible
Thistelephoneishearingaidcompatible.SelecttheTmodeonyourhearingaidto
enablethisfeature.
Technical information
Withinthecompartmentlocatedontheundersideofthetelephoneyouwillnd
severalswitches,theseswitchesdeterminecertaintechnicalparameterswhen
connectingthetelephone.
Toremovethecovercarefullypressasmallscrewdriver(uptoØ2,5mm)orsimilar
intotheholetotherightofthecover.
Recall time
Selectionof100/300/600mstimedloopbreakforrecallfunctionality.
Thestandardsettingis100msforUK/Australiaand600msforNewZealand.
Tone/Pulse
Selecttherequireddiallingtype,Tone(♫)orPulse(...)usingthe(.../)switch
locatedontheundersideofthetelephone.
Programme lock
The
P/N
/PROG.switch(locatedontheundersideofthetelephone)allowsaccess
totheOne-Touchmemoryprogramming.
P
Manualprogrammingallowed.
N
Noprogrammingallowed.
PROG.
Programmerdownloadsallowed.
Message Waiting indicator
SomePBXsystemsuseafunctioncalledMessageWaiting.Thetelephonewillindicate
whenacallwasreceivedbyashingtheMassageWaitinglightnexttothedisplay.
TheMW
switchislocatedbehindthebatterycoverontheundersideofthetelephone.
TheMWfunctionoperatesdifferentlydependingonthePBXinquestion.Please
contactthesystemcontrollerformoreinformation.
Thefollowingfouralternativesareavailable:LED+,LED-,ringerindicator
( )andhighDCvoltage(HV).Whenthetelephoneisusedinsystemswithouta
telephoneexchange( )shouldbeselected.

Related product manuals