1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean the amplifier only with a dry, lint-free cloth. For more thorough clean-
ing, unplug the amplifier from the mains supply and go over it lightly with a damp,
lint-free cloth. Do not use any type of chemical solvents or other cleaning products
for cleaning.
6. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
7. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Unplug this apparatus during lightning storms or when unused for long periods
of time.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
10. Only place apparatus horizontally and on a suitable table or rack.
11. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as
when the power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
when:
A. the power-supply cord or the plug has been damaged, or
B. objects have fallen, or liquid has spilled into the equipment, or
C. the equipment has been exposed to rain, or
D. the equipment does not appear to operate normally or exhibits a
marked change in performance, or
E. the equipment has been dropped or the enclosure damaged.
12. WARNING – Take care that objects do not fall and liquids are not spilled into
the enclosure through any openings. The equipment shall not be exposed to
dripping or splashing. Liquid-filled objects such as vases should not be placed on
the equipment.
13. The equipment has been designed for use in moderate climates and in
domestic situations.
14. Only connect the equipment to a power supply of the type described in the
operating instructions or as marked on the equipment.
The primary method of isolating the equipment from the mains supply is to
remove the mains plug. The equipment must be installed in a manner that makes
disconnection possible.
15. If an abnormal smell or smoke is detected from the equipment, turn the
power o immediately and unplug the equipment from the wall outlet. Contact your
dealer and do not reconnect the equipment.
The equipment should be serviced by qualified service personnel Safety instructions
Page 3
To Next Page
Loading...
