Connecting to a Device via Digital AV (Cont)
13
Connect one end of the mini-Digital AV Cable to
your device’s Digital AV port.
Step 1:
Step 2:
Step 3:
In the Main Menu, select the “INPUTS” icon and then the “DIGITAL” icon, as
shown on page 12. Your LED Pico+ should now be displaying the content
from your device.
Connect the other end of the mini-Digital AV Cable
to your LED Pico+’s Video In port.
If you’re connecting to a computer or laptop and the projector does not
automatically mirror it, read onto the next page for more information.
Note:
To Next Page
Loading...
