AAXA Technologies LED PICO + - Connecting a TF Card

Connect your speaker/headphones to
the projector’s audio port.
Ensure that the projector and/or the
headphones are powered on.
TF Card
18
How to insert your TF Card
• Slide in your TF card into the TF card
slot on the side of the LED Pico+ (facing
up as shown in picture).
• Gently slide the TF card until it clicks
into place.
*Review the “Specications”
section of this manual to read
about the supported le
formats.
How to access your TF Card
• Once your TF Card has been inserted,
you can navigate to any media content
in the main menu.
• After selecting the media content,
choose the TF card selection.
• You can now access the data on your
TF card through the onboard media
player
Microsoft Oce and PDF le formats are not supported
directly. In order to view a slideshow, you need to
convert your slideshow into JPEG pictures rst.
Note:
(up to 32 GB)