Index
A
Access rights, 53
Actuator type, 90
Address, 103
Air control, 62
Alarm
Setting, 93
Alarm events, 56
Alarm list, 94
Alarm settings, 74
Alarms, 47
Alarm delay at startup, 99
Alarm delays, 75
Alarm handling, 105
Alarm limits, 74
Alarm list, 94
Analogue inputs, 15
Analogue outputs, 15
Automatic restart at power-up, 101
B
BACnet, 98
Battery exchanger. See Liquid connected exchanger
Blocking of automatic restart at power-up, 49
Blocking of high speed, 99
Buttons, 51
C
Cascaded extract air temperature control, 26
Cascaded room temperature control, 26
Change language, 102, 106
Change password, 54
Change-over, 37
Changing the battery, 106
Close-off dampers, 45
Communication, 97
Configuration, 79
Actuator type, 90
Alarm setting, 93
Battery type, 83, 84
Control function, 82
Cooling control, 85
Demand control, 87
Exchanger de-icing, 88
External setpoint, 89
Fan control, 82
Fire dampers, 87
Free cooling, 86
Heat exchangers, 84
Heater type, 83, 84
Humidity control, 88
In- and outputs, 79
Objects, 82
Other parameters, 99
Pump control, 86
Run indication / Motor protection, 89
Running time, 3-position actuators, 90
Step controllers, 91
Support control, 87
System, 102
Control function, 82
Control pressure
Settings, 73
Control signal, analogue outputs. See
Cooling recovery, 35, 88
Crosswise interlock, 83
D
Damper control, 45
Damper limit, 88
De-icing Liquid connected exchanger. See Heat
exchangers Liquid connected exchanger
De-icing plate exchanger. See Heat exchangers Plate
exchanger
Demand control
Setpoint, 64
Demand controlled ventilation, 43, 87
Mixing dampers, 30
Digital inputs, 15
Digital outputs, 15
Display, 51
DX cooling, 31, 91
Min limit lowering, 85
Setting, 91
DX cooling, blocking, 85
E
ELA, 103
Electric heating, 28
Energy calculation, 109
Enthalpy control, 35, 89
Exchanger de-icing, 29, 30, 88
Setpoint, 60
Expansion model, 77
Expansion unit and Modbus master, 98
Extended running, 67
External setpoint, 36, 89
To Next Page
Loading...