Select
DiSEqC 1.2
or
USALS
using the ◄/► button. DiSEqC 1.2: General
motor
antenna using DiSEqC 1.2.
USALS: Motor antenna using
USALS.
ØMove Auto[W/E]
Press ◄/► button, the dish will be motorized to East/West continuously, it will
stop until it find the best signal.
ØMove west-east
Press ◄/► button, the dish will be motorized to East/West step by step, until
you find the best signal showed on the signal bar.
ØFine Tuning(1)
Input digital button to set the moving step
ØStore Position
Save the current position you searched.
ØGo to Position
Press OK button to move the dish to the position which you saved.
ØGo to Reference
Press OK button to move the dish to 0 position.
ØSet West Limit
You can set the maximum motor limit for both West to prevent damage to the
antenna.
ØSet East Limit
You can set the maximum motor limit for both East to prevent damage to the
antenna.
ØDisable Limit
Disable West limit and East limit.
ØGo to X.X
Press OK button to move the dish to the USALS Setup.
Tip:
Before you use
USALS
, you should go to Main
Menu →
INSTALLATION→
USALS
Setup to set you local position firstly.
3.3 Fast scan
To fast search channels by different providers base on Astra (19.2) satellite and
To Next Page
Loading...
