5. Settings
5.1 System Settings
Menu->SETTINGS->Syste
m Settings
Tip:
You can set all the settings
here by pressing ◄ /► button.
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub-prime audio language.
4.AD server：You can set on or off.
5. Subtitle Language: Set the subtitle language.
6. EPG Language: Set the EPG language.
7. TXT Language: Set the TXT language.
8. Digital Audio: If a channel has AC3 and PCM audio language at the same
time, when you select
RAW
it will set AC3 audio language as default output and
when you select
PCM
it will set PCM audio language as default output.
9. Scart Output：While the
HDMI Mode
is set to
576i
or
480i
mode,
you can
change the scart output
mode between
CVBS
and
RGB
mode.
10. Auto Channel Selection: If you set ON, in the channel list will play
automatically when you highlight the channel. If you set OFF, in the channel list
when you highlight the channel, you should press the OK button to play it.
11. Auto Exit CH List: If you set
ON
, the channel list will disappear when you
press
OK on a Highlighted channel. If you set
OFF
, the channel list will disappear
when you press OK on a playing channel.
12. Recall List: You can turn Recall List on or off. If you set ON, when you press
Recall button of RCU you can get the recall list. If you set OFF, when you press
recall button you can go back to the last program you have selected.
13. Low Power Standby：You can turn Low Power Standby on or off.
To Next Page
Loading...
