2.2 Rear Panel
Figure 3. Rear Panel
1. LOOP OUT
Connect another receiver.
2. LNB IN
Connect the satellite antenna cable.
3. USB2.0
One USB 2.0 Host Port.
4. SPDIF
Digital Audio output (Optical).
5. LAN
Connect to the internet using an Ethernet cable.
6. RS232
Connect to the computer using a serial line.
7. HDMI
Connect to the TV using an HDMI cable.
8. TV SCART
Connect to the TV using a Scart cable.
9. ON/OFF
Power on/off.
To Next Page
Loading...
