the 12515 transponders.
3.4 Factory Default
You can restore the product to the factory default and you can also setup it
according to the wizard.
Warning: Please note that once you perform
Factory Default all
, all data
and
settings will be deleted.
1.
Menu->INSTALLTION
->
Factory Default
2. Input the password.
3. Highlight the option you want and press the OK button to execute it.
Tip:
If you select “yes”, all data and setting will be lost. Then waiting a moment,
you will view the OSD language menu where you can select the language
according your mind.
1) All: All data and settings will be deleted.
2) Channel List Only: All channels data will be deleted.
3) Radio Channel Only: All radio channels data will be deleted.
4) Scramble Channel Only: All scramble channels data will be deleted.
5) TP Channel Only: All the channels data in the selected Transponder will be
deleted.
6) SAT Channel Only: All the channels data in the selected satellite will be
deleted.
3.5 USALS Setup
Menu-> INSTALLATION ->USALS Setup
If you set the Motor Mode to USALS, you need set the longitude and the
latitude in USALS Setup.
To Next Page
Loading...
