RED: Get IP address automatically.
GREEN: Test the network if connect correctly.
5.6.2 Connecting to the 3G
1. Plug in the 3G dongle to the USB port.
2. Enter
Menu->SETTINGS->3G.
3.selete the access point or set the auto detect on, then you can connect the
network.
5.6.3 Connecting to the Wi-Fi
(Wireless LAN)
1. Plug in the wireless USB
dongle to the USB port.
2. Enter
Menu->SETTINGS->Wireless Setting->Search Access
Pointer
.
3. Select the network name of your Wi-Fi access point from the list.
4. Press the OK button, then input the right password. And you can press
YELLOW button to disable/enable the WI-FI.
5. Enter
Menu-> SETTINGS->Wireless Setting->IP Setting
.
If the Network is connected, it should get the correct IP address and display the
“Connect”.(delete)
5.7 USB Update
Menu-> SETTINGS ->USB update
USB Update
can update software by using USB HDD or USB disk.
5.8 Network Update
Menu-> SETTINGS ->Network update
Network Update
can update software by network.(delete)
5.9About STB
Menu-> SETTINGS ->ABOUT STB
ABOUT STB
can get the information about the STB, such as product name,
To Next Page
Loading...
