ABB A135-H66 - Fig. 39: Removing the Nozzle Ring; Removing the Nozzle Ring

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.9 Removing the nozzle ring
© Copyright 2020 ABB. All rights reserved. HZTL4030_EN Rev.F February 2020
8.9 Removing the nozzle ring
Fig.39: Removing the nozzle ring
1. If present: Remove the metal C-ring(51105).
2. Position the fastening strips(51002) in place.
3. Pull out the nozzle ring(56001) with the two extraction devices(90070) and the service
support base(90012).
4. Remove the lamellar sealing ring (56005).
5. Remove the burst ring(57210).
Page 71 / 93