EasyManua.ls Logo

ABB A150-M Series - Fig. 3: Warning Plate Locations; Warning Plates on the Turbocharger

ABB A150-M Series
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
1 Introduction / 1.5 Warning plates on the turbocharger
© Copyright 2020 ABB. All rights reserved. HZTL4032_EN Rev.P March 2020
1.5 Warning plates on the turbocharger
Warning plates are affixed at the following locations:
Fig.3: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
u Order new warning plates from ABB Turbocharging Service Stations.
u Remove any warning plates that have become unreadable.
u Clean and degrease the areas designated for the warning plates.
u Fit new warning plates and remove protective sheets.
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
Page 8 / 171

Table of Contents

Other manuals for ABB A150-M Series

Related product manuals