1.4.2.4 Save the project
Select menu “File è Save Project”.
Alternatively, select the save icon in the tool bar.
Alternatively, press [Ctrl] + [S].
1.4.3 Configure the I/O module
● The types and order of modules in the Automation Builder project must match the real hard-
ware configuration.
● The position of the modules in the device tree can be changed by drag and drop.
Getting started with AC500 V3 products
Example project for central I/O expansion > Configure the I/O module
2021/05/14 3ADR010584, 2, en_US 17
To Next Page
Loading...
