ABB AC500-eCo Series User Manual

________________________________________________________________________________________________________
AC500-eCo - 1 - Hardware Introduction
Hardware Introduction
to
AC500-eCo

ABB AC500-eCo Series Specifications

General

Series	AC500-eCo
Power Supply	24 V DC
Programming Environment	Automation Builder
Real-time Clock	Yes
Protection Class	IP20
I/O Modules	Digital and Analog I/O modules
Analog I/O	up to 16 analog inputs and outputs
Communication	Ethernet
Programming Languages	IEC 61131-3 (LD, FBD, ST, IL, SFC)

Summary

2. AC500-eCo Hardware Descriptions

2.1 CPU Overview

Describes the AC500 system's central unit, its power options, and core functions.

2.1.1 CPU components

Details the physical components of a CPU module, using CPU PM554 as an example.

2.1.3 The CPU onboard I/Os

Details the onboard digital and analog inputs/outputs of AC500 CPUs PM554 and PM564.

2.1.4 Communication Interfaces

Describes the COM1, COM2, and I/O Bus communication interfaces for AC500 CPUs.

2.1.6 Mode Selection Switch RUN/STOP

Explains the RUN/STOP mode selection switch on AC500 CPUs for program execution control.

2.1.7 Status Display on the AC500 CPU

2.2 S500-eCo I/O Modules Overview

2.2.1 I/O Unit components

3. Hardware Installation and Wiring

3.1 Hardware Mounting

3.1.1 DIN Rail Mounting/ re-Mounting

3.1.2 Wall Mounting

3.2 Wiring

Provides critical wiring cautions and essential guidelines for safe AC500 system connections.

3.2.1 Power Supply Wiring

Details the power supply wiring for 24V DC and 100-240V AC AC500 CPU variants.

4. Appendix

4.1 Technical Data

4.2 Order Number

4.3 Guidelines of Safety

Provides crucial user information and safety guidelines for the safe installation and use of AC500-eCo PLC.