Need help?Do you have a question about the ABB ACS320 and is the answer not in the manual?
General| Overload Capacity | 150% for 60 seconds |
|---|---|
| IP Rating | IP20 |
| Frame Size | R1 to R3 |
| Enclosure Rating | IP20 |
| Frequency Range | 0 to 500 Hz |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature |
| Fieldbus Communication | Modbus RTU, PROFIBUS DP, CANopen |
| Communication Interfaces | RS485 |
| Operating Temperature | -10 to +50 °C (14 to 122 °F) |
| Storage Temperature | -40°C to +70°C |
| Humidity | Less than 95% (non-condensing) |
| Supply Voltage | 200 V to 240 V (±10%), 380 V to 480 V (±10%) |
| Input Voltage | 200 V to 240 V (±10%), 380 V to 480 V (±10%) |
General safety rules for drive, motor cable, and motor installation and maintenance.
Critical electrical safety instructions for qualified electricians, including precautions against electric shock.
General safety guidelines for installation, start-up, and operation, including warnings about ignoring instructions.
Specifies requirements for connecting the drive to the AC power line, including leakage current considerations.
Details the types of disconnecting devices required for different regions and safety standards.
Instructions for checking the insulation of the drive, input power cable, and motor/motor cable to ensure safety.
Provides connection diagrams and procedures for safely connecting input power and motor cables, including grounding.
Guides users through the step-by-step process of using the Start-up assistant for initial drive configuration.
Explains the function of the Start-up assistant in guiding users through initial drive configuration and data entry.
Explains how alarms and faults are indicated via LEDs and panel messages, and how to identify causes.
Details the methods for resetting faults, including keypad, digital input, fieldbus, or power cycling.
Lists common alarm messages, their causes, and recommended troubleshooting steps for quick resolution.
Provides a comprehensive list of drive faults, their potential causes, and corrective actions for effective troubleshooting.
Provides detailed electrical and mechanical ratings for various ACS320 drive types, including input/output currents and frame sizes.
Guides users on how to size the drive based on motor current and power, considering ambient temperature and altitude derating.
Specifies fuse requirements and alternative manual motor protectors for branch circuit protection, ensuring safe operation.
To Next Page
