Need help?Do you have a question about the ABB ACS150 and is the answer not in the manual?
General| Power Range | 0.37 to 4 kW |
|---|---|
| Voltage Range | 200 to 240 V, 380 to 480 V |
| Frequency | 50/60 Hz |
| Control Method | Scalar control |
| Protection Class | IP20 |
| Frequency Range | 0 to 500 Hz |
| Storage Temperature | -40 to +70 °C |
| Relative Humidity | 5 to 95 % (non-condensing) |
| Ambient Temperature | -10 to +50 °C |
| I/O | Digital inputs, Analog inputs, Relay outputs |
| Overload Capacity | 150% for 60 seconds |
| Braking Chopper | Built-in (for some models) |
Details the scope of ACS150 drives covered by this manual.
Safety precautions for installation and maintenance personnel.
Guidance on protecting against short circuits within the drive or supply cable.
Detailed instructions for connecting the drive's power cables.
Step-by-step guide for the initial drive start-up procedure.
To Next Page
