Need help?Do you have a question about the ABB ACS 601 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Protection Class | IP20 |
| Enclosure Rating | IP20 |
| Control Method | Scalar control, Vector control |
| Communication Protocols | CANopen |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Communication | CANopen |
| Power Range | 0.75-160 kW |
| Output Power | 0.75-160 kW |
General safety information and manual interpretation guidelines.
Explanation of the different types of safety warnings and notes used throughout the manual.
Specific safety precautions required during the installation and maintenance phases.
Safety considerations for electrical supply connections and proper grounding techniques.
Essential safety guidelines for connecting motors and ensuring proper insulation.
Crucial safety precautions for the physical installation of the drive unit.
Overview of the ACS 600 product family and guidance on manual usage.
Details on interpreting the drive's nameplate for identification purposes.
Procedure for contacting ABB for product inquiries and support.
Specifies environmental and site conditions essential for proper drive installation.
Step-by-step guide for physically mounting the drive unit.
Guidelines for installing the drive within a cooling air duct system.
Procedures for verifying motor and cable insulation before electrical connection.
Guidance on power, motor, and control cable types, routing, and connection practices.
Instructions for cover removal, replacement, and optional module installation.
Information on installing and connecting a braking chopper.
Comprehensive checklist for mechanical and electrical installation verification.
Procedures for cleaning heatsinks and replacing cooling fans.
Information on capacitor lifespan and reforming procedures.
Technical ratings for different enclosure types and IEC standards.
Factors affecting output current and recommended fuses.
Specifications for cable entries and external control connections.
Physical dimensions, weights, and environmental operating conditions.
Overview of preprogrammed faults, warnings, and software features.
Lists compliance standards, materials, and EMC guidelines.
Details on ABB's equipment warranty and limitations of liability.
Diagrams showing gland plate hole sizes for IEC and USA versions.
Visual guides for connecting control and encoder cables to the unit.
Additional information specific to installations following IEC standards.
Recommended power cable types and routing for IEC installations.
Details on connecting digital and analog inputs according to IEC requirements.
To Next Page
