Appendix A – ACS/ACC/ACP 601 Technical Data
ACS/ACC/ACP 601 Drives ACx=ACS/ACC/ACP A-17
Application Program
Various application programs are available for the ACS 600 AC drives.
In the tables of this section, the ACS 600 product family program
selections are referred to with the following abbreviations. Not all
selections are available for all types. One application program at a time
can be loaded in the memory of the drive.
Application Macros
The macros of the ACS/ACC/ACP application programs are below.
ACS 600 Application Program Abbreviation
Standard ACS
CraneDrive ACC
MotionControl ACP
System MultiDrive
ACS ACC ACP
FACTORY for basic industrial
applications
CRANE for normal crane drive SPEED CONTROL for closed loop
speed control
HAND/AUTO for local and remote
operation
M/F CTRL for two crane drive
applications with Master/Follower
operation
POSITIONING for point-to-point
positioning
PID CONTROL for closed loop
processes
USER MACRO 1 & 2 for user’s own
customized parameter settings
SYNCHRONIZING for positioning to
moving target
TORQUE CONTROL for processes
that require torque control
TORQUE CONTROL for processes
that require torque control
SEQUENTIAL CONTROL for
operation at preset constant speeds
USER MACRO 1 & 2 for user’s own
customized parameter settings
USER MACRO 1 & 2 for user’s own
customized parameter settings
To Next Page
Loading...
