ABB ACS 601 - Conduit Plates; (USA Version

Appendix B – ACS/ACC/ACP 601 Dimensional Drawings
ACS/ACC/ACP 601 Drives ACx=ACS/ACC/ACP B-9
Conduit Plates
(USA Version)
The following figures show the conduit plate (bottom view) of the
different size ACS 600 units:
At least three separate rigid metallic conduits must be used; one each
for input power, output power, and control wires. Additionally, a
separate conduit must be used for dynamic braking device, if used.
Conduit Entry Plates, R2 - R4 USA Version
R4
R3
R2
3/4”
1/2”
3/4”
3/4”
3/4” 3/4”
1/2”
1/2”
3/4”
1/2”
3/4”
3/4”